IDC Dione 5 Not Loaded 5324091-R
5324091-R | |
Mammography | |
GE HealthCare | Exchange - Return Defective |
Enter your approval number and submit to add item(s) to cart.
Please enter approval number
OR
Don't know your approval number? Call 800-437-1171
Enter opt 1 for the first three prompts, and have your System ID available.
If you add item(s) to cart and submit your order without the
approval number, GE will contact you before your order
can be confirmed for shipment.
Select your approver's name and submit to add item(s) to your cart
Please Select Approver Name
OR
Don't know your approval number? Call 800-437-1171
Enter opt 1 for the first three prompts, and have your System ID available.
If you add item(s) to cart and submit your order without
selecting an approver, GE will contact you before your order
can be confirmed for shipment.
Features
- Enhanced durability
- Compatible with a wide array of products and good drive speed
- The PC withstands without degradation, disruptions of any functionality, performance loss and permanent damage in an extreme range of temperatures minimum of +05° C and maximum of +40° C
- The noise during operation will not exceed 45dBa, including disks in use (transferring data)
Product Overview
The IDC Dione 5 Not loaded is used in the IDC Dione which comes under the modality of Mammography. This assembly consists of wall mount assembly, cables, processor, hard disk, passive backplane, DIMM, HDD Sata, Gitane 12 board and Fiber-channel interface board. The hard disk for this assembly is equipped with a serial ATA (SATA) interface. This interface is connected to the Second Connector on the CPU board using a serial ATA cable. The DVD ROM drive will be connected to Second Connector off the CPU board with an IDE cable. The DVD ROM drive will be recognized as master on the IDE Channel bus. The DVD ROM drive will be connected to First SATA connector of CPU board with an SATA cable. The DVD ROM drive shall be recognized as slave on the IDE Channel bus. Update the bios settings. Gitane board needs to be connected to power supply for proper functioning. CPU board shall be located in the slot PCIMG2 (top slot). The FCIB board shall reside in PCI slot 2, the Gitane board in PCI slot 3. The parallel port connector takes PCI slot 1, PCI slot 4 is kept free for future extensions. All the full-length cards in the system shall be held with the metal bar using appropriate rubber stubs or similar thing to prevent card dislocation. The PC is equipped with 2 GB of RAM, divided into 2 modules of 1GB each. They shall be placed into the green slots, named DIMM1 and DIMM3 on the CPU board. The hard drive is mounted below the DVD ROM drive. The GE product is an innovation and fit well into versatile customer needs. The part is diligently designed for superior performance and reliability. It is securely packed inside a high quality packing box to avoid physical damage during transit and labeled with details about the product, Quality Assurance (QA) seal and shipment details.